Solar Panel 12V 10 Amp regulator
|
Specifications
|
|
|
Boost
Maximum
|
14.3Volts
|
|
Boost
Cut in
|
12.5Volts
|
|
Float
Maximum
|
14.1Volts
|
|
Float
Cut in
|
13.1Volts
|
|
Charge
Current
|
10Amp
|
|
Supply Current
|
4milli-Amps
|
The full available charge current is allowed to flow into the battery until the battery voltage rises to the Boost Maximum Voltage. The battery now being almost fully charged, the unit switches to the float mode. The current is switched off and the battery voltage slowly falls. When it drops below the Float Cut in Voltage, the current is switched on again. It stays on until the voltage rises to the Float Maximum Voltage and then is turned off. The battery voltage will slowly oscillate between the Float Maximum Voltage and the Float Cut in Voltage. When the battery is being discharged enough for it to fall below the Boost Cut in Voltage, the unit will switch back into Boost Charge Mode.
This Charger unit only requires 4 milli-Amps of power to function.